Product Label - Magmaweld RS 350 M PRO Manuel D'utilisation

14 Technical Information

1.3 Product Label

EN
Duty Cycle
As defined in the standard EN 60974-1, the duty cycle rate includes a time period of 10 minutes. For example, if a machine specified as 250A
at %60 is to be operated at 250A, the machine can weld without interruption in the first 6 minutes of the 10 minutes period (zone 1). However, the
following 4 minutes should be kept idle for the machine cool down (zone 2).
USER MANUAL | MANUEL D'UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
RS 350 M / MW PRO - RS 450 M / MW PRO - RS 550 M / MW PRO
Three Phase Transformer Rectifier
Horizontal Characteristic
Direct Current
MIG/MAG Welding
Mains Input 3-Phase Alternating Current
Suitable for Operation at Hazardous Environments
X Duty Cycle
U0 Open Circuit Voltage
U1 Mains Voltage and Frequency
U2 Rated Welding Voltage
I1 Rated Mains Current
I2 Rated Welding Current
IP21S
Protection Class
S1
Rated Power
Time(min.)
www.magmaweld.com