12
Technical Information
1.3 Product Label
EN
Duty Cycle
As defined in the standard EN 60974-1, the duty cycle rate includes a time period of 10 minutes. For example, if a machine specified as 250A
at %60 is to be operated at 250A, the machine can weld without interruption in the first 6 minutes of the 10 minutes period (zone 1). However, the
following 4 minutes should be kept idle for the machine cool down (zone 2).
USER MANUAL | MANUEL D'UTILISATION | РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ | KULLANIM KILAVUZU
Single Phase Transformer Rectifier
TIG Welding
MMA Welding
Direct Current
Vertical Characteristic
Mains Input 1-Phase Alternating Current
Suitable for Operation at Hazardous
Environments
MONOTIG 220ip - MONOTIG 220ip AC/DC
X
Duty Cycle
U0
Open Circuit Voltage
U1
Mains Voltage and Frequency
U2
Rated Welding Voltage
I1
Rated Mains Current
I2
Rated Welding Current
IP21S
Protection Class
S1
Rated Power
Time(min.)
www.magmaweld.com