Repeat Playback; Programmed Playback - SOUNDMASTER NR975 Mode D'emploi

Repeat Playback

This feature allows you to continuously repeat a single track or the entire disc.
To Repeat A Single Track
Press the REPEAT/ALL
indicator flashes. Press the B. SKIP or F. SKIP button to
select the desired track, then press the PLAY/PAUSE
button to begin repeat playback of the selected track.
To Repeat The Entire Disc
Press the REPEAT/ALL button twice. The repeat
indicator remains On .
Press the PLAY/PAUSE button to begin repeat playback
of the entire disc.
To cancel repeat playback press the REPEAT/ALL button until the repeat
Indicator goes 'Off ' . Repeat playback is also cancelled by pressing the STOP
button or setting the function selector to the MW or UKW position.

Programmed Playback

This feature allows you to program of the CD 20 tracks
on a disc for playback in any desired order.
Note: You can program tracks while a disc is stopped.
1.) Press the PROGRAM button to enter the Program Mode.
The Program number briefly shows ' 0 1 ', the Program
indicator flashes.
2.) Press the F. SKIP or B. SKIP button to select the first
track number you wish to enter in the program memory.
Example: Track Number ' 8 '.
button once. The
,
.
6
Repeat