Deactivation And Disposal; Ec Declaration Of Conformity - Güde GWS 500 HM Traduction Du Mode D'emploi D'origine

GWS 500 HM

Deactivation and disposal

If the machine can no longer be used and it is to be
disposed, it must be deactivated and disassembled, i.e.
it must be put to a state in which it may not be used for
purposes for which it has been designed. The process
of disposal must consider the recovery of basic materi-
als of the machine. These materials can be potentially
reused in the recycling process. The manufacturer re-
jects any liability for any personal or property damage
incurred as a result of reuse of parts of the machine if
such parts are used for purpose other than the original
respective purpose. Machine deactivation: Each pro-
cess of deactivation or disposal must be performed by
staff trained for this purpose.
• The machine is disintegrated into parts.
• Block each moving part of the machine.
• Each machine element should be delivered to
certifi ed collection centres.
• Rubber parts should be removed from the machine
and delivered to a rubber parts collection centre.
• There is no other residual risk after deactivation and
blocking of the moving parts.
• Electrical structural elements are a special waste and
need to be disposed separately from the machine.
Approved extinguishers (e.g. powder extinguisher)
need to be used in case of fi re of the electrical
equipment of the machine.
Guarantee
Guarantee claims as per guarantee card attached.
The guarantee solely covers inadequacies caused
by material defect or manufacturing defect. Original
payment voucher with the sales date needs to be sub-
mitted for any claim in the guarantee period.
The guarantee does not cover any unauthorised
use such as appliance overloading, use of violence,
damage as a result of any unauthorised interference
or caused by foreign items. Failing to follow the ope-
rating and assembly instructions and common wear
are also not included in the guarantee..
Service
Do you have any technical questions? Any claim? Do
you need any spare parts or operating instructions?
We will quickly help you and without needles bure-
aucracy at our web pages at www.guede.com in the
Servicing part. Please help us be able to help you. In
order to identify your device in case of claim we need
the serial No., product No. and year of production. All
this data can be found on the type label. Please enter
it here for future reference:
Serial No.:
Art. No:
Year of production:
EC-Declaration of Conformity
GÜDE GmbH & Co. KG
Birkichstrasse 6, 74549 Wolpertshausen
Deutschland
We, hereby declare the conception and construction
of the below mentioned appliances correspond - at
the type of construction being launched - to appro-
priate basic safety and hygienic requirements of EC
Directives.
In case of any change to the appliance not discussed
with us the Declaration expires.
Log cutting saw GWS 500 HM
Appropriate EU Directives
2006/42/EC, 2004/108/EC
Harmonised standards used
EN 1870-6/A1: 2009
EN 60204-1/A1: 2009
EN 55014-1/A1: 2009
EN 55014-2/A2: 2008
EN 61000-3-2/A2: 2009
EN 61000-3-11: 2000
Wolpertshausen, 2012-04-13
Technical documentation
GÜDE GmbH & Co. KG, Joachim Bürkle,
Birkichstrasse 6, 74549 Wolpertshausen,
Germany
TÜV SÜD Product Service GmbH
Ridlerstraße 65, 80339 München
Germany, Nr. 0123
ENGLISH
Helmut Arnold
Managing Director
27