Medtronic LIFEPAK CR–T AED Mode D'emploi page 54

LIFEPAK ® CR–T AED TRAINER
Quick Start Reference Card
Button Function
Press to change
. Function is active only during simulated
ADVISED
analysis.
Press to advance the training electrodes to ON or
OFF.
Press to advance
This feature is active during simulated analysis only.
Press to activate
display (active only when Trainer is in simulated OFF
status). To clear, press the button again.
Press to activate
readiness display (active only when Trainer is in
simulated OFF status). To clear, press the button
again.
Feature not available
®
LIFEPAK CR–T AED TRAINER
Quick Start Reference Card
Button Function
Press to change
. Function is active only during simulated
ADVISED
analysis.
Press to advance the training electrodes to ON or
OFF.
Press to advance
This feature is active during simulated analysis only.
Press to activate
display (active only when Trainer is in simulated OFF
status). To clear, press the button again.
Press to activate
readiness display (active only when Trainer is in
simulated OFF status). To clear, press the button
again.
Feature not available.
to
SHOCK ADVISED NO SHOCK
to ON or OFF.
MOTION DETECTED
indicator on the readiness
WRENCH
indicator on the
CHARGE-PAK
to
SHOCK ADVISED NO SHOCK
to ON or OFF.
MOTION DETECTED
indicator on the readiness
WRENCH
indicator on the
CHARGE-PAK
Button Function
Press once to activate the
indicator in the readiness display. To clear,
press the button again.
Press any time to suspend device
operation. Press again to resume operation
at point of interruption.
Press to change the speaker volume. The
volume level scrolls up, and returns to
lowest level after the highest is reached.
Press to enter the
operating settings.
Press to enter the
operating settings.
Press the
RIGHT ARROW
to the next operating setting.
Press the
UP ARROW
desired option.
Button Function
Press once to activate the
indicator in the readiness display. To clear,
press the button again.
Press any time to suspend device
operation. Press again to resume operation
at point of interruption.
Press to change the speaker volume. The
volume level scrolls up, and returns to
lowest level after the highest is reached.
Press to enter the
operating settings.
Press to enter the
operating settings.
Press the
RIGHT ARROW
to the next operating setting.
Press the
UP ARROW
desired option.
ATTENTION
button
GREEN SELECT
button
RED SELECT
button to advance
button to select the
ATTENTION
button
GREEN SELECT
button
RED SELECT
button to advance
button to select the