Replacing The Brake Pads - Beta ALP 125cc 2008 Mode D'emploi

5
A
B
D
GB

REPLACING THE BRAKE PADS

The procedure for replacing the brake
pads is provided only for information. We
recommend having the operation per-
formed by a BETAMOTOR authorized
workshop.
Front brake
B
To replace the front pads, proceed as
follows:
• Loosen the two screws A and remove
the brake caliper.
• Unscrew
Note: Screws B are secured very tightly
and should be loosened before remov-
ing the caliper from the fork.
•Extract the brake pads.
•To refit the parts, follow the reverse pro-
cedure.
Ensure that the spring D shown in the fig-
ure is properly seated by checking that it
offers some resistance to the insertion of
the brake pads.
To avoid braking problems, take special
care in ensuring that the screws are refit-
ted properly.
Note:
When removing the brake caliper, take
C
care not to damage reed C, as it is ex-
tremely fragile.
66
the two screws B.