Beta ALP 125cc 2008 Mode D'emploi page 126

3
C
C
GB
F
A
B
D
F
E
HOW TO REMOVE BODY PARTS
Some parts of the body may have to be
removed for easier inspections or
maintenance.
WARNING:
If these parts are improperly reassembled,
they might suddenly come off while
driving, and the driver might lose control
of the motorbike.
How to remove the saddle
To remove the saddle, just remove the
two screws A and pull out the saddle B
from the back of the motorbike.
Note:
When removing the saddle, the under-
saddle side frame will also come off.
How to remove the tank cover
After removing the saddle, the tank cover
C can be removed as well:
- loosen the screw D at the centre of the
tank.
- loosen the two clamps E, in the front
section of the motorbike.
- remove the tank cover C.
How to remove the front light
holder
Disconnect all the electric connections
and loosen the two fixing screws F.
Remove the light unit G.
G
52