Adjusting The Home Position Of The Front Brake Lever; Adjusting The Home Position Of The Brake Pedal; Adjusting The Home Position Of The Clutch Lever; Adjusting The Handlebars - Beta RR 390 2017 Mode D'emploi

4
adjuSTiNG ThE hOmE
pOSiTiON Of ThE fRONT
BRakE lEVER
The home position of brake lever 2 can be
adjusted by means of screw 1.
1
2
adjuSTiNG ThE hOmE
pOSiTiON Of ThE BRakE
3
pEdal
The home position of brake pedal 3 can
4
be altered by turning adjusting screw 5 af-
ter loosening the counternut located under
dust cap 4. Loosen the counternut and turn
5
the adjusting screw until the desired height
is obtained. Retighten the counternut after
completing the operation.
adjuSTiNG ThE hOmE
7
pOSiTiON Of ThE CluTCh
lEVER
The adjustment screw 6 allows adjustment
6
of the distance of lever 7 from the knob.
The empty run is recovered automatically.
adjuSTiNG ThE
1
haNdlEBaRS
2
3
The lower bracket 1 can be mounted on
the holes nr. 2, 3 or 4 respectively, while
2
the handlebar can be rotated by 180° in
order to meet the driver's specific driving
4
3
needs.
4
GB
60