Proxxon MICROMOT 230/E Mode D'emploi page 8

Translation of the Original
GB
Operating Instructions
Proxxon - Micromot 230/E
Dear customer!
Always keep these operating instructions and
the enclosed safety guidelines within reach.
Only use this device with exact knowledge of
it and comply with the instructions and safety
guidelines!
This is necessary to ensure safe operation and,
secondly, it facilitates familiarisation with the
device and its functions.
Proxxon assumes no liability for the safe
function of the device in the case of:
• handling that does not comply with normal
intended use,
• use for other purposes not mentioned in
the manual,
• incorrectly executed repairs,
• failure to heed safety instructions,
• external infl uences for which the
manufacturer is not responsible.
We recommend using PROXXON original spare
parts for all repair and maintenance work.
Repairs should only be performed by qualifi ed
skilled personnel!
Please note: All information contained in these
operating instructions - especially the technical
data - corresponds to the status at the time of
printing.
We reserve the right to make further developments
in the interest of technical progress. We wish
you every success with the device.
Warning:
Read through all safety guidelines and
instructions. Failure to adhere to safety
guidelines and instructions can result in
electrical shock, fi re and/or serious injuries.
- 8 -
1 Legend (Fig. 1):
1. ON/OFF switch
2. Speed control knob
3. Device bracket
4. Connecting cable
5. Motor housing
6. Lock button
7. Sleeve nut with steel collets
8. Housing nut with 20 mm fi t
2 Description of the device:
The Micromot 230/E is ideally suited to tasks
such as precision drilling, milling, grinding,
polishing, brushing, rust removal, engraving,
chasing and cutting and, as a compact,
lightweight but still powerful device, is the fi rst
choice for electronics technicians, model
builders, precision
manufacturers, opticians and arts and crafts
professionals and
construction. Complete fl exibility is assured
when it comes to selecting the material to be
machined, thanks to our familiar and extremely
broad range of varied operational tools.
Machining of metals, non-ferrous metals, glass,
wood, minerals, ceramics, stone and much
more no longer presents a problem!
A carefully balanced permanent magnet DC motor
with extremely smooth running characteristics
provides powerful torque in this respect and,
in conjunction with the sensitive electronic
control, ensures the correct speed for the tool
employed and the task in hand.
The ground spindle with the collet holder is
mounted on precision ball bearings for
maximum precision, durability and smooth
running.
Superior-quality, three-jawed collet chucks are
used for tool holding. This enables the reliable
and absolutely centric clamping of even smaller
shafts, fulfi lling the optimum prerequisites for
fi rst-class concentricity and clean working
results!
mechanics, jewellery
for die and mould