S A F E T Y P R E C A U T I O N S; Electrical Risks - Hitecsa CLOSE CONTROL CED Série Mode D'emploi

S A F E T Y P R E C A U T I O N S

MECHANICAL RISKS
Danger to hands of cuts, bruises and amputation during maintenance, with machine open and in operation (with panels and
guards removed), see appropriate labels inside the machine.
Maintenance must be carried out only by qualified and authorised personnel.

ELECTRICAL RISKS

Danger of electrical shock due to accidental contact on main power supply switch when maintenance is being carried out with
electrical panel open.
Maintenance must be carried out only by qualified and authorised personnel.
HEAT RISKS
Danger to hands of burns from the piping of the condenser circuit during maintenance, with machine open and in operation
(with panels and guards removed), see appropriate labels inside the machine.
Maintenance must be carried out only by qualified and authorised personnel.
DANGER FROM NOISE OR VIBRATIONS
NO DANGER
DANGER FROM SOURCES OF RISK (electricity, static electricity, magnetic fields, radiations, laser etc...)
NO DANGER
OTHER SOURCES OF HEALTH RISK (powders, gases, water, vapour, fluids, fog, smoke, fire explosion, biological
and microbiological substances, chemicals etc...)
Refrigerant gases : do not effect any welding on piping or recipients that contain the refrigerant gas.
ERGONOMIC RISKS (safety distances, dimensions and ergonomic geometry etc...)
NO RISK
COMBINATION OF DANGERS (interruption of power supply)
NO DANGER
DANGER FROM UNFORSEEN CAUSES
NO DANGER
28 05.08 Ref.200989 Rev.100