Disposal Of Materials - Hitecsa CLOSE CONTROL CED Série Mode D'emploi

M A I N T E N A N C E

DISPOSAL OF MATERIALS

Filters:
Filters should be collected, placed in hermetic containers and sent to an authorised collection point, as per current norms.
Plastic or rubber materials and accessories: To be sent to specialised disposal centres, as foreseen by current norms.
Ferrous materials:
To be sent to specialised disposal centres, as foreseen by current norms.
Oils:
Current legislation prohibits the discharge of oils into sewer network and/or directly into the environment.
All oils must be collected and handed over to authorised disposal centres and must not be left in the environment.
This product is suitable for combustion in a specific closed and controlled burner, or for recycling in a specialised plant.
It may be possible to dispose of certain oils in agricultural terrain or in a purification plant, but it is necessary always to obtain
permission from local authorities.
The conditions of the oil, at the moment of disposal, may influence the options that are available.
Refrigerant gases:
Remains and/or unused quantities of gases; these should under no circumstances be discharged into the environment.
Non recyclable solutions or excess quantities should always be handed over to companies authorised to dispose of them, in
conformity with any local norms or legislation.
The producer or supplier should be able to give any information regarding recuperating or recycling gases by expert
refrigeration engineers.
Never use empty unpressurised containers. Any unpressurised containers should be returned to the supplier.
05.08 Ref.200989 Rev.100 49