Features Of Visitrak - Quick Guide; Start Here - Smith & Nephew VISITRAK Digital Manuel D'instruction

3. Instructions for Use
Features of VISITRAK – Quick Guide

START HERE

A
When the
display shows
the Area
Measurement
2
(in cm ) after
following the
instructions
overleaf,
you can:-
B
Measure the % change in wound area:
1. Press here
then use the
keypad to enter
the previous
area.
2. Press 'OK'
3. The display
will show the
% change in
area:
C
Calculate larger wounds using more than one tracing grid:
1. Press here
then measure
the second
wound by
following
steps 9 & 10
overleaf.
2. When the
processing is
complete the
unit will beep
and the display
will show the
total area in
2
cm .
06
88.9
cm 2
30.0
–
%
I58.9
2
cm
D
Calculate the % non-viable or % viable tissue:
1. Press here
then follow
steps 9 & 10
on page 3 to
measure an
area of viable/
non-viable
tissue.
2. When
processing is
complete the
unit will beep
and the display
will show the
area of viable/
non-viable
2
tissue in cm .
3. Press 'OK' to display the % viable/non-viable tissue.
E
Find the Length:
Press here
F
Find the Width:
Press here
NB
All buttons
have to be
pressed with
the stylus.
Remember, if a
mistake is made
all you have to
do is quickly
press 'C',
And to reset it keep 'C' pressed.
For more detailed instructions refer to the following pages.
8.0
2
cm