Introduction; Indications For Use; Warnings And Precautions; Symbols Guide - Smith & Nephew VISITRAK Digital Manuel D'instruction

Symbols Guide

Wound area in cm
Wound length in cm (longest distance along vertical axis)
Wound width in cm (longest distance along horizontal axis)
Percent change in wound area
Percent non-viable tissue within the wound
Wound depth in cm (using VISITRAK Depth)
Patient name/identity
Date of measurement
Location of wound(s)
Clinician name/identity
Indicates the advised orientation of the film when measuring a wound,
so that the measurements taken are comparable
1
Peel this layer first
2 Peel this layer second

1. Introduction

VISITRAK is a wound measurement system
comprising three components:
VISITRAK Digital
Battery powered
digital measuring
tablet with stylus.
VISITRAK Grid
Single use, 3-layer
tracing grid.
VISITRAK Depth
Single use, foam
tipped, sterile depth
indicator.
VISITRAK enables the measurement of wound
dimensions (area, length, width and depth)
producing a visible record of the dimensions
of a wound. The digital tablet converts a line
tracing into a true area measurement and can
be used to calculate the % area change from
the last area measurement. It is also possible
to measure the % non-viable tissue (or other
regions in the wound).
VISITRAK is portable, easy to use and can be
used from patient to patient.

Indications for use

VISITRAK is indicated for wound area
measurement and can be used on all wound
types. VISITRAK Digital is indicated for use
only with VISITRAK Grid and VISITRAK Depth.
VISITRAK Digital will only function with the
attached stylus.
04
2

Warnings and Precautions

VISITRAK Digital
• Do not use the coversheet within / on a
wound.
• Do not use VISITRAK Digital in a wet
environment. Serious electrical damage
may occur.
• Do not use VISITRAK Digital in the
presence of flammable mixtures.
• Do not take apart VISITRAK Digital.
• Do not sterilise VISITRAK Digital. Damage
or destruction to the device may result.
• Minimal pressure should be applied when
tracing the wound outline onto the
VISITRAK Digital with the stylus.
CAUTION: Misuse of the device will cause
inaccurate measurement and potential
damage.
VISITRAK Grid
• Do not fold or crease VISITRAK Grid.
• Not all pens are suitable for use on the
tracing grid. Ensure that a permanent
marker pen is used.
• Use minimal pressure when using a pen to
trace the wound edge.
• Do not touch the surface within the sealed
area of VISITRAK Grid. This surface will
come in direct contact with the wound.
• Do not use the product if the seals are
opened or damaged.
VISITRAK Depth
• Do not bend VISITRAK Depth.
• Only insert the foam tipped end into the
wound.
• Rest the tip on the wound bed using
minimal pressure. Care should be taken
not to depress the wound bed.
Open from this end
Store in a dry place
Do not reuse
Attention, see instructions for use
25˚C/
77˚F Store below 25˚C/77˚F
Lot number
LOT
Expiry date
EXP.
STERILE EO Ethylene oxide sterilised
„ „
AA / LR6 Battery type (1.5 volts – AA or LR6)
9 volts DC, 40 milliamps
9V 40 mA
In accordance with Electromagnetic
Compatibility Directive 89/336/EEC
Device Serial Number
SN
Date of Manufacture

2. Descriptions

Product Components:

VISITRAK Digital
(with batteries, replacement stylus nibs, nib removal ring and
coversheets)
Product Code Units
66000850 1 per box
VISITRAK Grid
Product Code Units
66000851 50 per carton
VISITRAK Depth
Product Code Units
66000852 50 per carton