Faro MC01 RL Mode D'emploi page 57

Servicing of the clamping chuck
Faro recommends cleaning and servicing the chuck system once a week.
 Remove the cutter or grinder, place the spray nipple tip in the openin gand spray.
 Carry out the servicing according to the instructions in the section,"Care with Faro Spray".
Chuck care
Faro recommends cleaning and servicing the chuck system once a week.
 Remove the cutter or grinder, place the spray nipple tip in the openin gand spray.
 Subsequently treat with the care products and care systems specified.
7.6 Packaging
NOTE
The sterilisation bag must be large enough for the handpiece so that the bag is not stretched.
The quality and use of the sterilisation packaging must satisfy applicable standards and be suitable for the sterilisation procedure!
 Individually weld the medical device in the sterilised item packaging.
MC01 R / RL - Instructions for use - EN
55