Meister AS108M-1 Mode D'emploi page 60

5400980-Akku-Bohrs_man 03.05.18 12:19 Seite 60
e Avoid contorted body positions.
Ensure that you have a secure
stance and keep your balance
at all times. This enables better
control of the power tool in
unexpected situations.
f Wear suitable clothing. Do not
wear loose clothing or jewellery.
Keep hair, clothing and gloves
away from moving parts. Loose
clothing, jewellery or long hair
may be caught on moving parts.
g If mechanisms are provided for
the connection of dust
extraction and collection
facilities, ensure that they are
connected and properly used.
Use of dust extraction can reduce
dust related hazards.
4 Use and care of the power tool
a Do not overload the device. Use
the appropriate power tool for
the task on hand. The correct
power tool will do the job better
and more safely at the rate for
which it was designed.
b Do not use the power tool if the
switch is defective. Any power
tool that cannot be controlled with
the switch is dangerous and must
be repaired.
c Disconnect the plug from the
mains and/or remove the
rechargeable battery before
making any adjustments,
changing accessories, or
storing the power tool. This
60
precautionary measure also
prevents accidental starting of the
power tool.
d Keep power tools not in use out
of the reach of children. Do not
let people who are not familiar
with the power tool or who have
not read these instructions use
the device. Power tools are
dangerous in the hands of
untrained users.
e Take good care of your device.
Check to ensure that moving
parts function properly and do
not jam, check for breakage of
parts or damage that may
impair the power tool's
operation. Have damaged parts
repaired before use. Many
accidents are caused by poorly
maintained power tools.
f Keep cutting tools sharp and
clean. Carefully maintained
cutting tools with sharp cutting
edges are less likely to jam and
are easier to control.
g Use the power tool,
accessories, insertion tools,
etc. according to these
instructions . Consider the
working conditions and the task
to be carried out. Using the
power tool for purposes for which
it was not intended may result in
a hazardous situation.
5 Battery use and care
a When recharging a battery, only
use chargers that have been
recommended by the