Checklist - ST Quadrat LUX-top FALZ-PLUS II Manuel D'utilisation

This list is available to download from

CHECKLIST

for regular inspection of LUX-top
®
LUX-top FALZ-PLUS anchor point
1 Corrosion
Is there any visible corrosion on one of the components
(bar, footplate, ring bolts, etc.)?
Can a cause for the corrosion (e.g. chimney nearby) be
found?
Is the load-bearing capacity of the anchor device
limited?
Is the fixing accessible for examination?
If yes, has the fixing been carried out completely and
correctly? (if applicable, check tightening torque!)
2 Dirt/soiling
Is one of the components dirty (e.g. soiled by bird
droppings, moss, algae)?
Does the dirt impair its functionality?
Is it possible to prevent the soiling in future?
ST QUADRAT Fall Protection S.A. – Your competent partner for fall protection devices – www.lux-top-absturzsicherungen.de
www.lux-top-absturzsicherungen.de
®
anchor devices by a competent person
Page 12 Version 11/2018
yes, on
..................................................................
no
yes,
........................................................................
no
yes
no
yes
no
yes
no
yes,
............................................................
no
yes,
.............................................................
no
yes,
.............................................................
no