Quick Start; Menu Operation - DeFelsko PosiTector SST Mode D'emploi

Press the
life, the gage will automatically go to sleep after 5 minutes of
inactivity (15 minutes while in Bresle Mode, pg. 10). While in
Sleep Mode, the gage powers up significantly faster— convenient
when moving between parts or locations. The gage will completely
power off after 4 hours of inactivity. Alternatively, select Power Off
from the main menu. All settings are retained.
To access the Menu, power-up the gage, then press the center
navigation button
used to navigate the menu. If desired, touch screen functionality
can be disabled within the Setup menu (See Touch, pg. 10).
Select a menu option by touching it, or use the
tons to highlight the desired option and press
On menus longer than one page, the current page number is
displayed below the menu name. Navigate between pages using
when the first menu item is selected, or
menu item is selected. If using touch, navigate between pages
by touching
Press the
Select Exit to close the Menu.

Quick Start

button to power up the Gage. To conserve battery

Menu Operation

. Either the keypad or touch screen can be
or , or by swiping up or down.
button or swipe right to return to a previous screen.
When a Menu option is highlighted, the
icon indicates on-gage help is available.
Press
help. A formatted PDF containing all on-
gage help items is available at
www.defelsko.com/help
NOTE:
have the latest on-gage help information.
indicates that a sub-menu exists for the
Menu option. Select the option to display its
sub menu.
or touch the
Update your gage to ensure that you
2
and
to select it.
when the last
icon to display the
but-