Setup Menu - DeFelsko PosiTector SST Mode D'emploi

Units
Allows the operator to change the displayed units for both
Temperature (°C or °F) and Surface Density (mg/m
Reset
Reset (menu Reset) restores factory settings and returns the
Gage to a known condition. The following occurs:
- All batches, stored measurements, batch names and screen
captures are erased.
- Calibration adjustments are returned to factory settings.
- The last stored background measurement (
- Menu settings are returned to the following:
Memory = OFF
Bresle Mode = ON
Auto Dim = ON
Display = None
Patch Volume = 3.0 ml
Hi Res = OFF
Perform a more thorough Hard Reset as follows:
1. Power down the Gage and wait 5 seconds.
2. Simultaneously press and hold the
the Reset symbol
This returns the Gage to a known, "out-of-the-box" condition. It
performs the same function as a menu Reset with the addition of:
- Bluetooth Pairing info is cleared.
- Menu settings are returned to the following status:
Flip Lock = OFF
Backlight = Normal
Auto Sync .net = ON
Sound = Medium
Touch = ON
NOTE:
- Date, Time and WiFi settings are not affected by either Reset.

Setup Menu

Bluetooth & Stream = OFF
WiFi & Access Point = OFF
USB Keyboard & Stream = OFF
BLE Keyboard = OFF
Surface Density units = mg/m 2
Temperature units = °C
appears.
Language = English
Battery Type = Alkaline
Bluetooth Smart = OFF
USB Drive = ON
9
or µg/cm
2
) is erased.
1
and buttons until
).
2