Memory Management - DeFelsko PosiTector SST Mode D'emploi

Set Clock
All measurements are date and time stamped (24-hour format)
when stored into memory. It is therefore important to set the
correct date and time. Use the
value, and the
and time setting can also be viewed at the top of the main menu.
Battery Type
Selects the type of batteries used in the Gage from a choice of
"Alkaline", "Lithium" or "NiMH" (nickel-metal hydride rechargeable).
The battery state indicator symbol is calibrated for the selected
battery type. No damage will occur if the battery type used in the
Gage does not match the selected battery type.
The PosiTector SST has internal memory storage for recording
measurement data. Stored measurements can be reviewed on-
screen or accessed via computers, tablets and smart phones. All
stored measurements are date and time-stamped.
The symbol appears when the Gage is set to store
measurement data.
Standard models
batches. "New Batch" closes any currently opened batch and
Advanced models
creates a new batch name using the lowest available number.
New batch names are date-stamped when they are created.
Scroll through display
modes (Advanced only)
Access the Menu
Screen Capture
Press both
the current display. The last 100 screen captures are stored in
memory and can be accessed when connected to a computer
(see PosiSoft USB Drive pg. 12).
and buttons to adjust it. The current date

Memory Management

store up to 1,000 readings in one batch.
store 250,000 readings in up to 1,000
and buttons simultaneously to save an image of
and buttons to select a
11
Store a reading
into memory
Restore brightness
after dimming