System Setting; Event Log; Demo - Fulgor Milano FCPO 315 P TEM 2F Instructions Pour L'installation Et L'utilisation

11 - System Setting

EN
With the oven on, select the icon
key to enter the SETTINGS menu. This menu permits
setting a number of parameters or special functions. It also
permits accessing the error events list.
1. Press the keys
with the key.
2. Use this menu to change the following settings:
Press the keys
be displayed from among the three available ones and
confirm with the

Event Log

The menu permits checking any recorded errors. These
codes can be notified to the after-sales service.
16
and confirm with the
to select the sub menu and confirm
to select the item to be set or to
key.

Demo

The purpose of this function is to set the DEMO mode,
which makes the oven useless for cooking but automatically
performs a demonstration of functions.
1. Press the keys to select the item ON.
2. Confirm with the key.
3. Press the key.
After about 30 seconds, the oven starts to operate in this
mode.
To temporarily stop the DEMO function, simply keep any
key pressed for a few seconds until the oven switches to
standby.
To start it again, press the
To disable the function, enter the DEMO display page and
set OFF. Confirm using the
NOTE Once set, the function remains enabled even if the
oven is disconnected from the power mains.
key.
key.