Switching The Oven On And Off; Important; Selecting The Cooking Mode; Starting Your Oven - Fulgor Milano FCPO 315 P TEM 2F Instructions Pour L'installation Et L'utilisation

Switching the oven on and off

IMPORTANT

• The key does not stop the function.
• After switching off the oven, the cooling fan could
continue to operate until the inner parts of the oven
have cooled down.
Press to switch the oven on and press again to switch it
off. The oven returns to standby mode.

Selecting the cooking mode

IMPORTANT
• Do not leave the door open for a long time during
cooking.
• The door must be kept closed during the BROIL functions.
• Position the grill or grills on an appropriate level.
Functions
BAKE
ROAST
TRUE CONVEC.
CONVEC. ROAST
CONVEC. BAKE
ECO BAKING
BROIL
CONVEC. GRILL
CONVEC. BROIL
PIZZA
CLASSIC PIZZA
(On some models)
DEFROST
DEHYDRATE

12 - Starting your Oven

Functions
WARM
WARM PLUS
SABBATH (On some models)
SELF CLEAN
1. Select the icon and press the key
appropriate cooking mode according to the food to be
cooked using the arrows
.
2. On this display page, it is still possible to change the
cooking mode by using the
3. If the proposed temperature is correct, confirm with
the key to start cooking, otherwise, if the
is not pressed within 10 seconds, the oven switches to
automatic mode and the cooking mode icon becomes
animated.

Changing the cooking mode

1. During untimed cooking, a cooking pause can be set by
pressing the key. All the settings of the suspended
cooking operation remain stored and can be reactivated
by pressing the same key again.
2. To change the cooking mode while the oven is working,
press the key and then the
another cooking mode can be selected from among
those available in the group by means of the arrows
.

Changing temperature

IMPORTANT
• The BROIL function operates at levels. No temperature
can be set because this works at fixed cycles according
to the set level from L1 to L5.
• The maximum temperature of the BROIL function is
limited according to the set level.
• In all the cooking modes where the temperature is fixed,
this is not shown on the screen.
• At the end of a function, the display screen shows
the residual compartment heat temperature from the
standby page.
1. From the cooking mode preview display page, the
temperature can be changed by means of the arrows
subsequently confirming by means of the
2. Once cooking has started, the temperature can in any
case be changed, at any time, by means of the arrows
.
EN
Select the
and confirm with the key
keys.
key
, key. At this point,
key.
17