Installation Of The Oven; Electricals; Respect For The Environment - Fulgor Milano FCPO 315 P TEM 2F Instructions Pour L'installation Et L'utilisation

To install the oven into the kitchen a cutout should be made
in accordance with the dimensions shown in the Cutout &
Dimensions figure.
The apparatus is to be fastened to the top by means of the
two screws provided in the kit through the holes made on
the oven uprights.
WARNING
As the apparatus is to be fitted in your kitchen furniture,
make sure that all surfaces in contact with the oven can
resist a temperature of approx 90°C.

Electricals

Absorbed power:
oven top element:
oven bottom element:
round element (hot air):
lamp:
hot air fan motor:
cooling fan motor:
Maximum absorbed power: (see data plate).
Supply voltage:
3500+1000W 230V
3500+1000W 240V
3000W 230V
3000W 240V
2x1300W 240V
1x2500W or 240V
(depending on model)
3x25W
2x44W or 1x44W
(depending on model)
44W
(see data plate).

3 - Installation of the Oven

Respect for the environment

The documentation for this appliance is printed on paper
bleached without chlorine or recycled paper to contribute
to protecting the environment. The packaging was designed
to prevent damage to the environment; they are ecological
products that can be recovered or recycled.
Recycling the packing saves raw materials and reduces the
volume of industrial and domestic waste.
THE PACKING MATERIAL is 100% recyclable and marked
with the recycling symbol. Dispose of in conformity with
local law. The packing material (plastic bags, polystyrene
parts, etc.) must be kept out of the reach of children because
it is potentially dangerous. THIS APPLIANCE is marked in
conformity with European Directive 2012/96/UE, Waste
Electrical and Electronic Equipment (WEEE). By making sure
that this product is disposed of correctly, the user contributes
to preventing potential negative consequences for the
environment and health.
THE SYMBOL on the product or accompanying documentation
indicates that this product must not be treated as domestic
waste but must be delivered to a suitable collection point for
the recycling of electrical and electronic equipment.
EN
5