Changing Or Cancelling The Appliance Operation - Thermador Masterpiece Serie Guide D'utilisation Et D'entretien

Touch the START l STOP touch button to start the
4.
appliance operation.
The status bar appears in the display to indicate the
preheating progress.
When the appliance has reached the set temperature,
"Oven preheated" is displayed and an audible signal
sounds. The oven continues cooking with the set
temperature.
Setting double oven
Select the upper or lower compartment by touching
1.
the or symbol to select the upper or lower oven
q r
cavity.
Make your settings as usual.
2.
When you have finished the settings for the first oven
3.
cavity, touch the q or
compartment.
The settings for the two oven cavities are shown side
by side on the display. The upper compartment is on
the left, the lower compartment on the right side of the
display.
To adjust the settings, touch the field of the required
oven cavity on the display.
Note: You can only make setting for one oven cavity at a
time.
Default Values
The appliance suggests a temperature or setting for each
heating mode. You can accept this value or change it in
the appropriate area.
24
r symbol to select the other
Preheating Bar
As soon as a new heating mode is started, the
preheating bar appears on the display. The preheating
bar indicates the temperature increase in the oven cavity.
When the oven is fully preheated, a sound signal will
occur.
INFO Touch Button
If the INFO touch button lights up, important information
regarding the mode you are using is available. This may
include for example recommendations on suitable
cookware or how to prepare food for a safe cooking
result. When you touch the INFO touch button, the
information is displayed for a few seconds.
To exit the INFO text immediately, touch the INFO touch
button or the display.
Sounds
The appliance uses various sound signals during
operation. A sound signal can be heard whenever you
use a touch button or touch field, or when an operation is
started or finished. You can adjust the volume of these
sounds in the Settings menu. ~ "Adjust Basic Settings"
on page 21
Changing or Cancelling the Appliance
Operation
Note: In a double oven, if both cavities are operating, it
is necessary to select the cavity in which you wish to
make changes.
Changing the appliance operation
Use the START l STOP touch button to stop the
1.
operation.
Touch the area for the setting that should be changed.
2.
Swipe to the left or right to change the setting.
3.
Use the START l STOP touch button to start the
4.
changed operation.
Notes
If only adjusting temperature, the oven may restart
▯
automatically.
The cooling fan may continue to run while an operation
▯
is interrupted.
Cancelling the appliance operation
Press the START l STOP button to cancel the appliance
operation.
Note: With double ovens, if both cavities are operating
the cavity must be selected before pressing
START|STOP.