Wlan Connection On Standby; Time And Date Settings; Manually Setting The Date/Time; Updating - TechniSat DIGITRADIO 370 CD IR Mode D'emploi

16.3.5 WLAN connection on standby

Under [WLAN Active on Standby], select whether the WLAN connection is to
>
be maintained in standby mode (YES) or not (NO).
Note that, for unrestricted and smooth use and operation via the TechniSat
CONNECT App, this function must remain switched on.
The TechniSat CONNECT App can be downloaded from your smartphone's App
store.

16.4 Time and date settings

16.4.1 Manually setting the date/time

Depending on the setting for time updates (Section 16.4.2), the date and time might
have to be set manually.
Press the MENU button and use the / buttons to select the [System
>
Settings] > [Time and Date] item.
> Press the ENTER button.
Use the / buttons to select the [Set Date/Time] item and press ENTER.
>
The first digits (day) of the date flash and can be changed using the /
>
buttons.
> Press the ENTER button to apply the setting.
> The next date digits (month) then start to flash and can again be changed as
described above.
> Press the ENTER button after every additional setting in order to go to the
next setting.
> Proceed with the time in the same way as described above.
> After all settings have been made and the ENTER button pressed for the last
time, [Time Saved] appears on the display.

16.4.2 Updating

Here you can specify whether time updates should be carried out automatically
via the Internet, DAB+ or FM, or whether you wish to enter them manually (Section
16.4.1).
Press the MENU button and use the / buttons to select the [System
>
Settings] > [Time and Date] > [Update] item, then press ENTER.
Use the /buttons to select the following options:
>
[Update from DAB] (Update via DAB+ only)
[Update from FM] (Update via FM only)
DE
EN
FR
NL
81