With the [NO] setting, the scan stops automatically upon detecting
each available station. This can result in weak stations being played with
background noise.
>
Press the ENTER button to save.
8.6 Audio settings
Press the MENU button and select the > [Audio Setting] item.
>
Use / to select the [Mono Only] > [NO] item to play the sound in stereo,
>
or [Mono Only] > [YES] (if the FM signal is weak).
Confirm the setting by pressing the ENTER button.
>
8.7 Saving FM stations to a memory slot
The station memory can save up to 20 stations in the FM range.
>
First set the desired station frequency (Section 8.3, 8.4)
>
In order to store this station in a memory slot, hold down the PRESET button
while playing until [Save Channel] appears in the display. Then use the /
buttons to select a favourites memory slot (1 - 20). Press the ENTER button to
save.
>
Repeat this process to save additional stations.
You can also save stations to one of the One-Touch buttons (1 - 10) by
holding down the corresponding button a little longer.
8.8 Retrieving FM stations from a memory slot
>
To retrieve a station that you have stored in the FAV memory slots, briefly
press the PRESET button and select a station slot (1 - 20) using the /
buttons. Press the ENTER button to play the station.
If no station is saved in the selected station slot, [(empty)] appears on the
display.
Alternatively, the corresponding One-touch button (1 - 10) on the remote
control can be used.
DE
EN
FR
NL
67