Switching Off The Alarm After Being Woken Up - TechniSat DIGITRADIO 370 CD IR Mode D'emploi

> Here you can select from Off (alarm is switched off), Daily (every day of the
week), Once, Weekdays (Mon - Fri) or Weekends (Sat and Sun). Press ENTER
to apply the setting.
Time
> Here you can enter the alarm time and date (if required).
First use the / buttons to select the hours and press the ENTER button to
accept this. Then input the minutes. Again, accept this by pressing the ENTER
button.
If Repeat> [Once] has been selected, you must also enter the date as well as
the time.
Mode
You then enter the source. BUZZER, Internet radio, DAB, FM, CD or USB are
>
available. Press the ENTER button to accept the setting.
Station
If you have selected Internet radio, DAB or FM, you can then enter whether or
not you want to be woken up by the last station listened to or by one from
your Favourites list (if favourites have been saved). Press the ENTER button to
accept the setting.
Volume
You can then set the alarm volume using the / buttons. Press the ENTER
>
button to confirm.
Save
Press the ENTER button to save the alarm.
The time must be read for the alarm to function properly. For more details, see
Section 16.4.2.
When an alarm is active, an alarm symbol appears on the display.

15.2.2 Switching off the alarm after being woken up

> Press the On/Standby button on the remote control or on the device to
switch off the alarm.
DE
EN
FR
NL
77