Ejecting The Cd; Playing Music From A Usb Device; Controlling Usb Playback - TechniSat DIGITRADIO 370 CD IR Mode D'emploi

If you press Stop, change the source or remove the CD, the programming is
deleted.

12.9 Ejecting the CD

> Press the EJECT button to eject the CD.
Always stop the playback prior to removing the CD.

13 Playing music from a USB device

You can play MP3 audio files stored on a USB data medium via the
DIGITRADIO 370/371 CD IR.
To play from a USB data medium, this must be connected to the USB port
(15).
The device does not support the connection of USB media (hubs, etc.) via a
USB extension cable.
Not suitable for direct connection to PCs!
The device supports USB media (USB 1.1, 2.0) of up to 32 GB, formatted in the
FAT16 or FAT32 file format. The maximum file size for a media file is 4 GB.
Press the MODE button to switch to USB mode.
>
> [USB] appears in the display.
Playback starts automatically with the first track in the first folder.
The display for the categorisation/folder depends on the structure on your
USB medium. As such, pay attention to the information on the display.
The MP3 audio files are read and shown on the display in the form of the total
number of tracks ([T]) and folders/albums ([F]). Do not start the operation
until the content has been read completely, to ensure that all the required
information on the memory medium has been read.
If no memory medium has been connected or it cannot be read, [No USB]
appears on the display.
If there is no playback, the DIGITRADIO 370/371 CD IR switches to standby
after 15 minutes.

13.1 Controlling USB playback

By pressing the Play/Pause
>
time appears on the display), or continue playback by pressing it again.
> Use the Stop
on the display.
74
button, you can pause playback (the playing
button to stop playback. The total number of tracks appears