Frame counter
Before shooting
After shooting
Maximum frame number
allowing predicted
capturing
Playback image number
Shot number
40
Record mode
A frame counter is displayed in the
right upper corner of the display
when the camera is in a shooting
mode. The upper number shows
the total shot number and the
lower number indicates the re-
maining number of frames, which
is subtracted each time when the
shutter is released.
* Since the function of the lower
counter is calculated based on
images with relatively low data
compression ratios, depending
upon photographic conditions,
there may be a case that the
number is not subtracted.
Playback mode
When the camera is in Playback
mode, two numbers appear at
upper right corner of the monitor.
The upper one indicates the frame
number of the image being played
on the monitor. The lower one
indicates total number of pictures
taken.
Replaying images
Right button
(forward)
Left button
(reverse)
Setting resolution
Image
resolution
Press Mode shift button to set the
camera to Playback mode and the
last picture taken appears on the
monitor.
Press Right button to advance
pictures and Left button to reverse
them.
Remember to select the resolution
setting each time you turn on the
camera. The setting auto starts at
„N" Normal resolution. With cam-
era turned on in Record mode, press
Right button to select image reso-
lution which will appear upper left
corner of the monitor in letters H, N
and L. The letters stand for:
H = High resolution at 2304 x
2304 pixels (interpolated)
N = Normal resolution at
1536 x 1536 pixels
L = Low resolution at
768 x 768 pixels
41