Specific Safety Rules - MIRKA Miro 955 Instructions D'utilisation

Symbols used in this manual
V...............volts
A...............amperes
Hz.............hertz
W..............watt
~.............alternating current
n ............no load speed
0
-1
min .........revolutions or reciprocation per minute
............With electrical earth
...........read these instructions
...........Always wear eye protection
...........Always wear a dust mask.
..........Always wear hearing protection
do not dispose of electric tools, accessories and packaging
together with household waste material

SPECIFIC SAFETY RULES

1. Keep hands away from rotating sanding head area at all times!
2. Prolonged breathing of airborne dust from drywall sanding may effect respiratory
function: Always use a vacuum cleaner with a bag approved for drywall dust installed. Always
wear a respirator approved for dust and mist.
3. Sanding LEAD-BASED paint is extremely toxic and should not be attempted. Only allow
professionals with special training and equipment perform this task.
4. Maintain proper footing and balance at all times. Do not overreach. Use proper scaffolding
5. Always wear appropriate safety equipment when operating.
6. Important: After completing sanding, switch off the switch and wait for the coasting
sanding head to stop completely before putting the tool down.
7. Never operate the tool in an area with flammable solids, liquids, or gases. Sparks from the
commutator/carbon brushes could cause a fire or explosion.
8. There are cer tain applications for which this tool was designed. The manufacturer
strongly recommends that this tool NOT be modified and/or used for any application other
than for which it was designed. If you have any questions relative to its application DO NOT
use the tool until you have written the manufacturer and have been advised.
9. Use the machine with both hands at all times. Loss of control can cause personal injury.
10. Keep power supply cord clear from the working range of the machine. Always lead the
en
58