Additional Safety Warnings; Technical Data - MIRKA AROS-B 150NV Mode D'emploi

en | us • ca

Additional safety warnings

• Read all instructions before using this tool All operators must be fully trained in the proper, safe use of this tool
• All maintenance must be carried out by trained personnel For service, contact a Mirka authorized service center
• If the tool appears to malfunction, stop using it immediately and arrange for service and repair
Additional information on battery and charger
• Never attempt to open the battery pack for any reason If the plastic housing of the battery pack breaks or cracks,
immediately discontinue use and do not recharge

Technical data

Voltage
Speed
Orbit
Size of backing pad
Weight (incl. battery) *
Battery charger
Input
Charging time
Storage temperature range
Charging temperature
Dimension
Weight
Degree of protection
Battery pack
Type
Battery voltge
Capacity
Weight
Noise and vibration information
Measured values are determined according to EN 60745
Sound pressure level (L
Sound power level (L
Sound measurement uncertainty K
Vibration emission value a
Vibration emission uncertainty K *
Specifications subject to change without prior notice Model range may vary between markets
* In order to reflect normal working conditions of the sander the operating conditions did deviate from the
standard method as follows: Grain size of the abrasive was 5 μm Feed force was 10 N
The values stated in the table are derived from laboratory testing in conformity with stated codes and standards and
are not sufficient for risk evaluation Values measured in a particular work place may be higher than the declared
values The actual exposure values and amount of risk or harm experienced by an individual are unique to each
situation and depend upon the surrounding environment, the way in which the individual works, the particular
material being worked, work station design and the user's exposure time and physical condition Mirka Ltd accepts
no responsibility for the consequences of using declared values instead of actual exposure values for any individual
risk assessment
192
Mirka® AROS-B 150NV & AOS-B 130NV • 32 mm (1 ¼") • 10.8 V
)
pA
)
WA
*
h
Mirka® AROS-B 150NV
10 8 VDC
4,000–8,000 rpm
5 0 mm (3/16")
Ø 32 mm (1 ¼")
0 56 kg (1 24 lbs)
Mirka BCA 108
100–240 VAC, 50/60 Hz
< 40 min (2 0 Ah)
–20 °C ... 80 °C (–4 °F ... 176 °F)
0 °C ... 40 °C (32 °F ... 104 °F)
191 x 102 x 86 mm
0 66 kg (1 46 lbs)
II /
Mirka BPA 10820
Rechargeable Li-ion 3IXR19/65
10 8 VDC
2 0 Ah 21 6 Wh
0 18 kg (0 40 lbs)
Mirka® AROS-B 150NV
61 6 dB(A)
72 6 dB(A)
3 0 dB(A)
1 9 m/s
2
1 5 m/s 2
Mirka® AOS-B 130NV
10 8 VDC
4,000–8,000 rpm
3 0 mm (1/8")
Ø 32 mm (1 ¼")
0 57 kg (1 26 lbs)
Mirka® AOS-B 130NV
61 2 dB(A)
72 2 dB(A)
3 0 dB(A)
2 54 m/s
2
1 5 m/s 2