MIRKA Miro 955 Instructions D'utilisation page 62

en
STARTING AND STOPPING TOOL
Switching the machine on and off
On/Off Switch
To switch on:
While holding with the left hand on the column and the right hand on the main handle, Press the
rocker switch to the right with the thumb of the right hand. Anticipate and be ready for the start
up torque when the machine first starts.
To switch off:
Press the rocker switch to the left. After the machine has been switched off, the sanding disc will
still rotate for a time. Take care that parts of your body do not come into contact with the do not
set the machine down while it is still rotating!
Adjusting the rotation speed:
Speed Adjustment
The speed of the machine is variable to suit diff erent tasks. It can be adjusted from 650/min up
to 1600/min by using the thumb wheel. Using the right thumb, turn in the downward (coun-
terclockwise) direction to increase the speed and in the upward (clockwise) direction to de-crease
the speed. Generally, you should use the higher speed for fast stock removal and the lower speed
for more precise control.
HOW TO USE THE TOOL
Effective control of this powerful saw requires two-handed operation for maximum safety and
control. The proper hold is to keep one hand on the main handle and the other hand on the
sponge grip on the column. It is vitally important to keep stable footing at all times, especially
when standing on scaffolding or stilts.
62