Functional Description; Electrical Connection; Extension Cable - MIRKA Miro 955 Instructions D'utilisation

cable away behind you.
11. Immediately switch off the machine if unusual vibrations or if other malfunctions occur.
Check the machine in order to find out the cause.
12. The dust that arises when working with this tool can be harmful to health. Use a dust
absorption system and wear a suitable dust protection mask and remove deposited dust with
a vacuum cleaner.
13. Keep work area clean and well lit.
14. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools.
15. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges and refrigerators.
16. Stay alert, watch what you are doing and use common sense when operating a power
tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol
or medication.
17. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool may result in personal injury.
18. Disconnect the plug from the power source and/or the battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools.

FUNCTIONAL DESCRIPTION

This Electric Drywall Sander is specially designed for the most efficient sanding of drywall or
plaster walls and ceilings for both new construction and renovation work. It is designed to work
in conjunction with a vacuum cleaner for minimum dust and best sanding results. The pivoting
sanding head allows excellent results with minimum time and effort.

Electrical connection

The network voltage must conform to the voltage indicated on the tool name plate. Under no
circumstances should the tool be used when the power supply cable is damaged. A damaged
cable must be replaced immediately by an authorized Customer Service Center. Do not try to
repair the damaged cable yourself. The use of damaged power cables can lead to an electric shock.

Extension cable

If an extension cable is required, it must have a sufficient cross-section so as to prevent an
excessive drop in voltage or overheating. An excessive drop in voltage reduces the output and can
lead to failure of the motor. The following table showsyou the correct cable diameter as a function
of the cable length for this machine. Use only U.L. and CSA listed extension cables. Never use two
extension cables together. Instead, use a long one.
en
59