Operation; Control Functions; Drive Display - Franklin Electric SUBDRIVE UTILITY Manuel D'utilisation

OPERATION

Control Functions

Drive Display

The SubDrive Utility is equipped with three lights to provide system status and diagnostic informa-
tion.
1. Power Light: A steady green light indicates the drive is powered on.
2. Status Light: A steady or flashing green light indicates drive status.
3. Fault Light: A steady or flashing red light indicates a system problem. Specific fault codes are
identified by a flash sequence. Refer to
The following table shows the various light combinations that describe system status.
LED Running
Symbol Legend
"Diagnostic Fault Codes" on page
Idle Off
ON
32.
Fault Transducer Broken Pipe
Fault
Off
OPERATION
Control Functions
Invalid
Configuration
Flashing
29