Operation; Control Functions; Drive Display - Franklin Electric MONODRIVE UTILITY Manuel Du Propriétaire

OPERATION

Control Functions

Drive Display

The MonoDrive Utility is equipped with three lights to provide system status and diagnostic infor-
mation.
1. Power Light: A steady green light indicates the drive is powered on.
2. Status Light: A steady or flashing green light indicates drive status.
3. Fault Light: A steady or flashing red light indicates a system problem. Specific fault codes are
identified by a flash sequence. Refer to
The following table shows the various light combinations that describe system status.
LED Running
Symbol Legend
"Diagnostic Fault Codes" on page
Idle Off
ON
30.
Fault Transducer
Fault
Off
OPERATION
Control Functions
Broken Pipe Invalid
Configuration
Flashing
27