Simultaneous Operation - Eurocave Wine Bar 2.0 Mode D'emploi

M
M
M
OPERATION:
1 2 3 4
1 2 3 4
1 2 3 4
Press once to activate the lighting mode.
M M
Light
Light
Light
1 2 1 3 2 4 3 4
ON / OFF
M
M
Light Light
Automatic colour variation or pause.
1 2 3 4
1 2 3 4
3
2 4
ght Setting colours. Pressing one of these keys will cause the automatic colour
M
Light
variation function to stop.
3
1 2 4
M
Setting brightness, valid only for fixed lighting.
Light
1 2 3 4
Setting the speed of colour variation, or sensitivity for the music function.
Light
Music mode: the colours vary according to the sound intensity.
Save function
M
1 2 3 4
The save function can only be used in fixed colour mode.
Press
Light
Set the desired colour by pressing
Press
The colour is stored on the key selected.
Whenever you press this key the stored colour will appear.
Use of the remote control with several appliances
M
3
1 2 4
Light
to vary the colours. Press again to select.
M M
then or
1 2 3
1 2 3 4
M
1 2 3 4
Light Light
Light
M M
1 1 2 2 3 3 4 4
Light Light
or .
4
Independent operation:
Aim at the sensor zone, at a distance of less than
25 cm

Simultaneous operation:

Aim at the zone indicated, at a distance of more
than
- 20 cm for 2 appliances
- 110 cm for 3 appliances
- 160 cm for 4 appliances
Comment: In colour sequence mode, it is not
possible for all the products to be synchronised.
M
1 2 3 4
Light
-GB11-