Filling The Solution Tank; Solution Tank Indicator - Nilfisk Advance SC5000 34D Mode D'emploi

A - ENGLISH INSTRUCTIONS FOR USE

FILLING THE SOLUTION TANK

See Figure 2-4. Fill the solution tank with a maximum of 37 gallons (140 Liters) of cleaning solution. The solution tank can be filled to the bottom
of the Solution Fill (17). The solution should be a mixture of water and the proper cleaning detergent for the job. Always follow the dilution
instructions on the detergent container label. NOTE: EcoFlex machines can either be used conventionally with detergent mixed in the tank or the
detergent dispensing system can be used. When using the detergent dispensing do not mix detergent in the tank, plain water should be used.
CAUTION!
Use only low-foaming, non-flammable liquid detergents intended for machine application. Water temperature should not
exceed 130 degrees Fahrenheit (54.4 degrees Celsius)
FIGURE 2-4
17

SOLUTION TANK INDICATOR

See Figure 2-5. The solution tank has three level sensors that correspond with three measurement points. The Solution Level Indicator (C4)
displays the level (1-3) of the solution in the tank. Once the tank is empty the Solution Empty Indicator (C26) will flash on the display.
FIGURE 2-5
C4
C26
A - 18 Advance SC5000 - 56091219 1/2021