Approved Uhp And Run Flat Tyre Demounting And Mounting Procedure; Low Profile Tyres; Demounting - Corghi A 2025 LL Manuel D'utilisation

APPROVED
UHP AND RUN
FLAT TYRE

DEMOUNTING

AND MOUNTING
PROCEDURE
For a detailed description of the UHP and
RUN FLAT tyre mounting/demounting
procedure, please refer to the instructions
in the manual prepared by WDK (German
Tyre Industry Association).
LOW PROFILE
TYRES
Demounting
- Position the mounting/demounting tool
correctly against the edge of the rim (Fig.
25), as described for soft-walled tyres.
- push the hydraulic control lever down
(Fig. 26) to place the hook under the bead
(Fig. 26).
NB: Ensure that the bead of the lower side
of the tyre has not been re-mounted back
onto the rim.
52
25
Operator's manual A 2025 LL
26
27