Non-Combustible Facing Material - Napoleon BHD4N Série Instructions D'installation Et D'opération

32
5.4

NON-COMBUSTIBLE FACING MATERIAL

NON-COMBUSTIBLE FACING MATERIAL
WARNING: Non-combustible facing material must not project more than 4" (101.6mm) from the face of the
EN door (all four sides). If greater projections are desired, increase the clearance to the sides and top by 2"
on-combustible facing material must not project more than 4" (101.6mm) from the face of the
(50.8mm) for every additional 1" (25.4mm) of projection. If using an optional surround, the same rule applies,
sides). If greater projections are desired, increase the clearance to the sides and top by 2"
starting from the top of the surround. Ensure clearances are maintained for surround removal, as it must lift
every additional 1" (25.4mm) of projection. If using an optional surround, the same rule applies,
off the appliance for maintenance.
the top of the surround. Ensure clearances are maintained for surround removal, as it must lift
nce for maintenance.
A
A
3"(76.2mm)
6" (152.4mm)
m)
2" (50.8mm)
5" (127mm)
m)
4" (101.6mm)
mm)
PTIONAL
RROUND
SECTION A - A
W415-1285 / F / 12.21.16
NON-COMBUSTIBLE FACING MATERIAL
B
B
3"(76.2mm)
4" (102mm)
0" (0mm)
2" (50.8mm)
TOP OF
0" (0mm)
APPLIANCE
DOOR
OPTIONAL
SURROUND
SECTION A - A
B
B
6" (152.4mm)
5" (127mm)
3"(76.2mm)
6" (152.4mm)
4" (101.6mm)
2" (50.8mm)
5" (127mm)
TOP OF
4" (101.6mm)
APPLIANCE
DOOR
SECTION B - B
71.6
6" (152.4mm)
5" (127mm)
4" (101.6mm)
0" (0mm)
TOP OF
APPLIANCE
DOOR
FRONT OF
APPLIANCE
SECTION B - B
71.6
TOP OF
APPLIANCE
DOOR