10.3
CARE OF GLASS
DO NOT CLEAN GLASS WHEN HOT! DO NOT USE
ABRASIVE CLEANERS TO CLEAN GLASS.
Buff lightly with a clean dry soft cloth to remove accumulated
dust or fi ngerprints. Clean both sides of the glass after the
fi rst 10 hours of operation with a recommended fi replace
glass cleaner. NOTE: Vinegar-based or ammonia-free
glass cleaners have generally demonstrated an ability to
provide a clean, streak free glass surface. Thereafter clean
as required. If the glass is not kept clean permanent discoloration and / or blemishes may result.
Do not contact the inside surface of the glass with razor blades, steel wool or other metallic objects as a thin
layer of metal removed from the object may be deposited onto the coating which results in a discoloured
stain or scratch like mark. Such marks are not removed using the normal cleaning procedures given but
require specialized techniques.
Contact you local authorized dealer / distributor for complete cleaning instructions.
This appliance is factory equipped with 5mm tempered glass. Use only replacement parts available from
your appliance manufacturer. DO NOT SUBSTITUTE MATERIALS.
10.4
SHIPPING BRACKET
Remove the door(s), refer to "DOOR REMOVAL / INSTALLATION" section for instructions.
A.
Cut the strap holding the glass and vent thimble in place.
B.
Remove the 2 screws holding the shipping bracket / vent shield in place, as shown.
C.
NOTE: The two screws removed from the shipping bracket vent shield MUST be replaced.
WARNING
!
HOT GLASS WILL
CAUSE BURNS.
DO NOT TOUCH GLASS
UNTIL COOLED.
NEVER ALLOW CHILDREN
TO TOUCH GLASS.
AVERTISSEMENT
!
LA VITRE CHAUDE CAUSERA
DES BRÛLURES.
NE PAS TOUCHER LA VITRE
AVANT QU'ELLE AIT REFROIDI.
NE JAMAIS LAISSER LES
ENFANTS TOUCHER LA VITRE.
5.4
5.5.2
W415-1285 / F / 12.21.16
51
EN