Non-Combustible Facing Material - Napoleon HD81NT Instructions D'installation Et D'opération

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

34
6.3

NON-COMBUSTIBLE FACING MATERIAL

EN
WARNING: Non-combustible facing material must not project more than 1" (24.5mm) from the face of the door
(all four sides). If greater projections are desired, increase the clearance to the sides and top by 2" (50.8mm)
for every additional 1" (25.4mm) of projection. If using an optional surround, then 2" (50.8mm) clearance from
the surround is required before projecting out a maximum 2" (50.8mm). If greater projections are desired,
increase the clearance from the surround by 2" (50.8mm) for every 1" (25.4mm) of additional projection.
A
A
f i r e - p a r t s . c o m
6" (152.4mm)
4" (101.6mm)
2" (50.8mm)
OPTIONAL
SURROUND
W415-0687 / G / 08.26.13
4"
(101.6mm)
3" (76.2mm)
2" (50.8mm)
TOP OF
APPLIANCE
0" (0mm)
DOOR
SECTION A - A
B
B
6" (152.4mm)
4" (101.6mm)
2" (50.8mm)
0" (0mm)
SECTION B - B
71.5A
4" (101.6mm)
3" (76.2mm)
2" (50.8mm)
1" (25.4mm)
TOP OF
APPLIANCE
DOOR

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Hd81pt

Table des Matières