Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
(GREEN)
42
6.9
LOGO PLACEMENT
EN
7.0 WIRING DIAGRAM
7.1
RECEPTACLE WIRING DIAGRAM
NOTE: Ensure that the transformer is plugged into the receptacle.
7.2
ELECTRONIC WIRING DIAGRAM
DO NOT USE THIS APPLIANCE IF ANY PART HAS BEEN UNDER WATER. CALL A QUALIFIED
SERVICE TECHNICIAN IMMEDIATELY TO HAVE THE APPLIANCE INSPECTED FOR DAMAGE TO THE
RISK OF ELECTRICAL SHOCK OR EXPLOSION. DO NOT WIRE 110V TO THE VALVE OR TO THE
ALL WIRING SHOULD BE DONE BY A QUALIFIED ELECTRICIAN AND SHALL BE IN COMPLIANCE
WITH LOCAL CODES. IN THE ABSENCE OF LOCAL CODES, USE THE CURRENT CSA22.1 CANADIAN
ELECTRIC CODE IN CANADA OR THE CURRENT NATIONAL ELECTRIC CODE ANSI/NFPA NO. 70 IN
ALWAYS LIGHT THE PILOT WHETHER FOR THE FIRST TIME OR IF THE GAS SUPPLY HAS RUN OUT,
W415-1285 / F / 12.21.16
WIRE
NUTS
1/2"
LOGO
(13mm)
1/2" (13mm)
ELECTRICAL
BOX
APPLIANCE WALL SWITCH. INCORRECT WIRING WILL DAMAGE CONTROLS.
WITH THE GLASS DOOR OPENED OR REMOVED.
GROUND
(GREEN)
3 PRONG
WIRE
RECEPTACLE
NUTS
WARNING
!
ELECTRICAL CIRCUIT.
THE UNITED STATES.
GROUND
L2
(GREEN)
(WHITE)
CABLE
L1
CONNECTOR
(BLACK)
L2
(WHITE)
69.2_2
ELECTRICAL
COVER
Publicité
Chapitres
Table des Matières
