Non-Combustible Facing Material - Napoleon Ascent Multiface Serie Manuel D'installation Et D'opération

finishing
EN

10.10 non-combustible facing material

WARNING
!
Non-combustible facing material must not project more than 4" (101.6mm) from the face of the door (all four
sides). If greater projections are desired, increase the clearance to the sides, bottom and top by 2" (50.8mm) for
every additional 1" (25.4mm) of projection. If using an optional surround, the same rule applies, starting from the
top of the surround. Ensure clearances are maintained for surround removal, as it must lift off the appliance for
maintenance.
A
A
4"
(101.6mm)
2" (50.8mm)
Optional
surround
42
W415-1285 / H / 08.07.18
WARNING
!
Non-combustible facing material must not project more than 4" (101.6mm) from the face of the doo
sides). If greater projections are desired, increase the clearance to the sides, bottom and top by 2
every additional 1" (25.4mm) of projection. If using an optional surround, the same rule applies, star
top of the surround. Ensure clearances are maintained for surround removal, as it must lift off the a
maintenance.
A
A
4"
(101.6mm)
6" (152.4mm)
2" (50.8mm)
5" (127mm)
4" (101.6mm)
Top of
appliance
Door
Optional
surround
Section A - A
B
B
6" (152.4mm)
5" (127mm)
3"(76.2mm) 4" (101.6mm)
2" (50.8mm)
Top of
0" (0mm)
appliance
Door
Section A - A
B
B
3"(76.2mm)
6" (152.4mm)
2" (50.8mm)
5" (127mm)
0" (0mm)
4" (101.6mm)
Top of
appliance
Door
Section B - B
44.4
6" (1
5" (1
4" (1
Section B - B
44.4