6.5
GLASS MEDIA INSTALLATION
CLEAN THE GLASS MEDIA PRIOR TO INSTALLATION. BEFORE APPLYING THE CLEANED GLASS, ENSURE
DO NOT CHANGE OR SUBSTITUTE THE GLASS MEDIA MATERIAL PROVIDED WITH THIS APPLIANCE. IF
REPLACING, USE ONLY THE REPLACEMENT GLASS MEDIA AVAILABLE FROM YOUR AUTHORIZED
DO NOT PLACE ANY MEDIA (GLASS OR VERMICULITE) ON THE PILOT MESH. THIS WILL INTERFERE WITH
Evenly spread the glass media onto the media tray, ensuring no glass media falls into the pilot opening. If this
happens, insert a clean bag into your vacuum cleaner and vacuum out the glass media. Replacement glass
can be purchased from your local authorized dealer / distributor.
CLEANING GLASS MEDIA
Glass media may have a fi ne oil residue that needs to be cleaned prior to installation. Clean the glass with mild
dish soap, drain, rinse thoroughly and dry before placing around the burner.
NOTE: Glass media may cover the entire media tray. Care should be taken around the pilot mesh.
We recommend that no media should be placed directly on the pilot mesh.
(HD4STG AND HD4PG ONLY)
(HD4STC AND HD4C ONLY)
6.6
OPTIONAL ROCK PLACEMENT (HD4STC AND HD4C ONLY)
Place the refractory driftwood rocks onto the media
tray, around, but not on the burner ports or pilot mesh.
WARNING
!
THAT IT IS DRY.
DEALER / DISTRIBUTOR.
THE PILOT OPERATION
MEDIA TRAY
MEDIA TRAY
74.2B
PILOT MESH
PILOT MESH
37
EN
W415-1146 / A / 02.16.13