Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
3
Installing Ulok system
STEP
on the walls
The Ulok system parts are in the
side wall boxes. (1 pack per box)
Install three X fasteners (1) on the side of the back wall
(14) that will be assembled with the side wall, in the pre
drilled holes using the screws provided (2).
There is a positioning pin on X
Quick tip
fastener so they can only be
installed one way.
Fasten 3 retraction pins per side wall in the pre drilled
holes with the screws provided (4) to the left-hand or right-
hand fastening flange of the side walls (15) depending on
which side the wall will be installed on.
The side wall is interchangeable.
Quick tip
For wall to the left, install the pins
on the right side, for wall to the right
install the pins on the left side.
3.1
Check me!
1
Positioning
pin
2
14
3.2
Check me!
Fastening flange
3
This side down
9
14
Back wall
This side
down
14
Side wall
15
4
Publicité
Table des Matières
