Installing The Base - MAAX Olympia square 4832 Guide D'installation

2

Installing the base

STEP
Remove clear plastic film on the base. Use
cardboards on the base floor as protection until
the installation is complete.
Apply silicone around the edge of the drain hole in
the base (surface between the top part of the drain
and the base). Assemble as shown.
Hand tiGHten onlY !
VeriFY tHe MaaX loGo on tHe drain coVer
is FacinG tHe riGHt WaY
reMoVe silicone eXcess!
Install the base (13) pushing it completely against the
studs.
Verify that the base is completely level on all sides.
Confirm that the drain pipe is centered in the drain
head. We recommend a plumber to complete the
drain pipe connection.
Check me!
Check me!
Check me!
Leveling the base is critical
for wall alignment
Top view
2.1
2.2
Flush
Studs
2.3
7
Rubber
Cardboard
Top view
Flush
13
13