Promac JDT-2512V Mode D'emploi page 5

4. Machine specifications
4.1 Technical data
JDT-2512V:
Drilling Capacity Mild Steel
Tapping Capacity Mild Steel
Chuck Size...B16
Spindle Travel
Distance chuck to Base
Distance Chuck to Table (max) 255mm
Table Size
Table Travel
Table Tilt
Work Table Weight Capacity
Head Travel
Spindle Taper
Column Diameter/ Material
Cast Iron
Number of Spindle Speeds
Pulleys Material
Spindle Speeds Range 100-2100RPM
Base Size
Base Work Area
Table / Base Material
Head Stock Material
Spindle Distance to Column
Overall (LxWxH) 690×410×1040mm
Net weight
Mains 400V ~3L/PE 50Hz
Output power
Reference current
Extension cord (H07RN-F): 4G1,0mm²
Installation fuse protection
JDT-3216V:
Drilling Capacity Mild Steel
Tapping Capacity Mild Steel
Chuck Size...B16
Spindle Travel
Distance chuck to Base
Distance Chuck to Table (max) 760mm
Table Size
Table Travel
Work Table Weight Capacity
Spindle Taper
Column Diameter/ Material
Steel Tube
Number of Spindle Speeds
Pulleys Material
Spindle Speeds Range 100-2100RPM
Base Size
Base Work Area
Table / Base Material
Head Stock Material
Spindle Distance to Column
Overall (LxWxH) 740×460×1030mm
Net weight
Mains 400V ~3L/PE 50Hz
Output power
Reference current
Extension cord (H07RN-F): 4G1,0mm²
Installation fuse protection
4.2 Noise emission
Acoustic pressure level (EN 11202):
Idling at maximum speed
The specified values are emission levels
23mm
and are not necessarily to be seen as
M14
safe operating levels.
1-16mm
As workplace conditions vary, this
100mm
information is intended to allow the user
500mm
to make a better estimation of the
hazards and risks involved only.
246×278mm
224mm
± 45 °
60kg
4.3 Content of delivery
345mm
B16 1-16mm drill chuck with arbor
MT-2
(MT-2 for JDT-2512V, MT-3 for JDT-
Ø 70mm /
3216V)
Head rising crank and handle
Variable
Operating tools
Cast Iron
Operating manual
Spare parts list.
340×520mm
258×275mm
Cast Iron
Cast Iron
203mm
5. Transport and start up
5.1 Transport and installation
91 kg
The machine will be delivered in a
reliable carton(JDT-3216V with extra
0,55 kW S1
pallet underneath).
1,8A
For transport use a forklift or hoist.
10A
Make sure the machine does not tip or
fall off during transport.
Danger of tipping due to high gravity
32mm
center!
M16
During handling, the machine shall be
1-16mm
134mm
lifted only in vertical direction.
1100mm
Please refer to instruction manual in
380×416mm specification and machine weight to
760mm
arrange handling manner. Be sure to
60kg
use capable fork - lifter or hoist to lift of
MT-3
machine. The handling and
Ø 98mm /
transportation shall be carried out by
qualified persons. Fork - lift or hoist can
Variable
Cast Iron
be used in handling and shall be
operated by qualified driver.
440×648mm
350×357mm Before handling, make sure all movable
Cast Iron
parts are secured in their position and
Cast Iron
all movable accessories should be
246mm
removed from machine. The steel rope
should average pull the machine head,
table and column tightly.
230 kg
Keep all the processes in a carefully
and slightly condition. Bump or crash
0,75 kW S1
are strictly prohibited. It will cause
2,5A
precision shift and electronic controller
damaged.
10A
5.2 Positioning the Machine
I. Owing the machine is heavy,
75 dB (A)
please use crane to pull it out from
the carton box.
II. The head and the worktable of the
machine can be rotated 360°, so
choose a location with enough
space and solid foundation.
III. Clean all rust protected surfaces
with a mild solvent e.g. petroleum.