Before Use - Briteq BTX 2R BEAM Mode D'emploi

ENGLISH
OPERATION MANUAL
Thank you for buying this Briteq
please read these operating instructions very carefully before you start using this unit.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer. This device was designed to produce decorative effect lighting and is used in
light show systems.
 An incredible powerful moving beam projector based on the legendary Philips MSD Platinum 2R lamp!
 The advanced optics guarantee an incredibly bright beam with excellent specs:
 Brightness : 338'400 lux @ 5m and 92'420 lux @ 10m!
 2,8° Beam angle
 DMX-controlled electronic focus
 17 sharp gobos + open
 14 carefully selected diachronic colors + open
 Very fast mechanical dimmer/shutter
 Different strobe functions
 2 rotating prisms:
 1pc 8-facet rotating prism with different macros, controlled by DMX
 1pc Trapezoid rotating prism for extra effect impact.
 The very fast pan/tilt movements (540°/270°) assure very dynamic show programming.
 Different pan/tilt-macros, controlled by DMX
 8 or 16bit resolution pan/tilt resolution with position correction.
 The matrix LCD-display assures easy navigation in the different setup menus
 Different DMX channel modes (14ch + 16ch) for maximum flexibility
 Easy firmware updates keep your machine up-to-date at all times (optional firmware updater needed)
 Remote lamp on/off control
 Neutrik 3pin & 5pin in/outputs for maximum flexibility in a professional environment
 Neutrik Powercon in/outputs: up to 16A can be daisy chained for easy installation

BEFORE USE

 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
Check the contents:
Check that the carton contains the following items:
 Operating instructions
 BTX-BEAM 2R
 2x omega Brackets
 Powercon cable
BRITEQ
®
®
product. To take full advantage of all possibilities and for your own safety,
1/78
OPERATION MANUAL
BTX-BEAM 2R