Briteq BTX 2R BEAM Mode D'emploi page 14

ENGLISH OPERATION MANUAL
Home Position Adjustment
Press MENU button into menu mode, then press ENTER button for about 3 seconds into offset mode to
adjust the home position. Select the function by ENTER button. Use UP and DOWN button to choose the
submenu, press the ENTER button to store and automatically return to the last menu. Press MENU button to
exit.
Pan
Enter offset mode, Select Pan, press ENTER button to confirm, the
current position will blink on the display, use UP and DOWN buttons to
offset the value from -128 to 127, press ENTER button to store. Press
MENU button to exit.
Tilt
Enter offset mode, Select Tilt, press ENTER button to confirm, the
current position will blink on the display, use UP and DOWN buttons to
offset the value from -128 to 127, press ENTER button to store. Press
MENU button to exit.
Shutter
Enter offset mode, Select Shutter, press ENTER button to confirm, the
current position will blink on the display, use UP and DOWN buttons to
offset the value from 0 to 255, press ENTER button to store. Press
MENU button to exit.
Color
Enter offset mode, Select Color, press ENTER button to confirm, the
current position will blink on the display, use UP and DOWN buttons to
offset the value from -128 to 127, press ENTER button to store. Press
MENU button to exit.
Gobo
Enter offset mode, Select Gobo, press ENTER button to confirm, the current position will blink on the
display, use UP and DOWN buttons to offset the value from -128 to 127, press ENTER button to store. Press
MENU button to exit.
Prism (1 or 2)
Enter offset mode, Select Prism, press ENTER button to confirm, the current position will blink on the
display, use UP and DOWN buttons to offset the value from 0 to 255, press ENTER button to store. Press
MENU button to exit.
R-Prism
Enter offset mode, Select R-Prism, press ENTER button to confirm, the current position will blink on the
display, use UP and DOWN buttons to offset the value from -128 to 127, press ENTER button to store. Press
MENU button to exit.
Focus
Enter offset mode, Select Focus, press ENTER button to confirm, the current position will blink on the
display, use UP and DOWN buttons to offset the value from 0 to 255, press ENTER button to store. Press
MENU button to exit.
BRITEQ 12/78 BTX-BEAM 2R
®