Dmx Functions; Fixture Setting - Briteq BTX 2R BEAM Mode D'emploi

ENGLISH
Standard display explained:
Base 31°C
036
Md.2 14Ch.
SETUP MENU - Main functions
Turn on the unit, press MENU button to enter into menu mode, press UP and DOWN buttons until the
required function is shown on the display. Select the function by pressing the ENTER button. Use UP and
DOWN buttons to choose the submenu, press the ENTER button to store/confirm and automatically return to
the last menu. Press MENU button or leave the unit unused for one minute to exit menu mode.
The main functions are shown in the menu structure, the grayed boxes are the default settings:

DMX Functions

Enter menu mode, select DMX Functions, press ENTER button to confirm, use UP and DOWN buttons to
select DMX Address, DMX Channel Mode or View DMX Value
DMX Address (DMX512 address setting)
Select DMX Address, press ENTER button to confirm, the current address will blink on the display, use UP
and DOWN button to adjust the address from 1 to 512, press ENTER button to store. Press the MENU
button to go back to the last menu, if you leave the unit unused for one minute it will automatically exit from
menu mode.
DMX Channel Mode
To select DMX Channel Mode, press ENTER button to confirm, the current channel mode will blink on the
display, use UP and DOWN button to select Mode1, Mode2, ... Press ENTER button to confirm. Press the
MENU button to go back to the last menu, if you leave the unit unused for one minute it will automatically exit
from menu mode.
View DMX Value
Select View DMX Value, press ENTER button to confirm. Channel function and its value will show on the
display, use UP and DOWN button to view other DMX values. Press the MENU button to go back to the last
menu, if you leave the unit unused for one minute it will automatically exit from menu mode.

Fixture Setting

Enter menu mode, select Fixture Setting, press ENTER button to confirm, use UP and DOWN buttons to
select Pan Inverse, Tile Inverse, BL.O. P/T Moving, BL.O. Color Change or BL.O. Gobo Change.Pan
Pan Inverse
Select Pan Inverse, press ENTER button to confirm, current mode will blink on the display, use UP and
DOWN buttons to select No (normal) or Yes (pan inverse), press ENTER button to store. Press the MENU
button to go back to the last menu, if you leave the unit unused for one minute it will automatically exit from
menu mode.
Tilt Inverse
Select Tilt Inverse, press ENTER button to confirm, current mode will blink on the display, use UP and
DOWN buttons to select No (normal) or Yes (tilt inverse), press ENTER button to store. Press the MENU
button to go back to the last menu, if you leave the unit unused for one minute it will automatically exit from
menu mode.
P/T Feedback (pan/tilt Feedback)
Select P/T Feedback, press ENTER button to confirm, current mode will blink on the display, press
UP/DOWN buttons to select No (Pan or tilt's position will not feedback while they are out of step.) or Yes
BRITEQ
®
Shows the temperature of the CPU in the base
Shows the DMX start address of the unit
Shows the currently selected channel mode (19ch mode on the display)
7/78
OPERATION MANUAL
BTX-BEAM 2R