Reset Functions; Special Functions - Briteq BTX 2R BEAM Mode D'emploi

ENGLISH
Select Firmware Version, press ENTER button to confirm, firmware version will show on the display, press
MENU button back to exit.

Reset Functions

Enter menu mode, select Reset Function, press ENTER button to confirm, use UP and DOWN buttons to
select Pan/Tilt, Shutter/Prism, Color, Gobo, Focus or All.
Pan/Tilt (Reset Pan/Tilt)
Select Pan/Tilt, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the unit will run
built-in program to reset pan and tilt to their home positions) or No, press ENTER button to store. Press the
MENU button to go back to the last menu, if you leave the unit unused for one minute it will automatically exit
from menu mode.
Shutter/Prism (Reset Shutter/ Prism)
Select Shutter//Prism, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the unit
will run built-in program to reset shutter and Prism to their home positions) or No, press ENTER button to
store. Press MENU button to exit.
Color (Reset Color)
Select Color, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the unit will run
built-in program to reset color to their home positions) or No, press ENTER button to store. Press MENU
button to exit.
Gobo (Reset GOBO)
Select Gobo, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the unit will run
built-in program to reset GOBO wheel to their home positions) or No, press ENTER button to store. Press
MENU button to exit.
Focus (Reset Focus)
Select Focus, press ENTER button to confirm, use UP and DOWN buttons to select Yes or No, and press
ENTER button to store. Press MENU button to exit.
All (Reset All)
Select All, press ENTER button to confirm, use UP and DOWN buttons to select Yes (the unit will run built-in
program to reset all motors to their home positions) or No, press ENTER button to store. Press MENU button
to exit.

Special Functions

Enter menu mode, select Special Functions, press ENTER button to confirm, use UP and DOWN buttons
to select Fixture Maintenance or Factory Setting.
Fixture Maintenance
Select Fixture Maintenance, press ENTER button to confirm, use UP and DOWN buttons to select Interval
or Remain Time.
Interval
Select Interval, press ENTER button to confirm, the interval time will show on the display. Press
MENU button to exit.
Remain Time
Select Remain Time, press ENTER button to confirm, the remaining time will show on the display,
press ENTER button to confirm, use UP and DOWN buttons to select Exit or Reset time, press
MENU button to exit.
Factory Setting
Select Factory Setting, press ENTER button to confirm, the fixture will reset to factory settings and exit
menu mode.
BRITEQ
®
11/78
OPERATION MANUAL
BTX-BEAM 2R